Ceramic Coatings | High Energy Plasma

MBI Coatings, Inc. - Ceramic Coatings

MBI Coatings applies ceramic coatings by utilizing advanced plasma spray systems.  Ceramic coatings are an engineering tool that can transform an ordinary metal into a high-performance surface. Ceramic coatings are defined as non-metallic, inorganic materials. High hardness and thermal insulation are commonly recognized properties.

When chosen correctly ceramic coatings can significantly halt wear and corrosion, insulate from heat, even promise dimensional, thermal and chemical stability. When applied by our high energy plasma, the coatings produced are considered denser, more wear and corrosion resistant, and exhibit superior heat shield properties. Ceramic coatings are inert to acids, alkali and solvents.


Typical Properties

  • Bond Strength: Over 12,000 psi
  • Hardness: varies, typically ≥ 55HRC
  • Thickness: From .002” - .050” build-up
  • Texture: 110-450 Ra (as needed; Polished 50-110 Ra (Snag-free finish); 1-3 Ra (Ground and lapped)
  • Porosity: Typically less than 2%; 0% when using proper sealers

Common Ceramic Applications

  • Heated Rolls
  • Cooling Rolls
  • Piston Heads/Sleeves
  • Furnace Liners
  • Thermal Piping
  • Stretch Rolls
  • Heater Plates and Shields
  • Exhaust Systems
  • Headers and Downpipes
  • Bearing Surfaces
  • Seal Surfaces
  • Pulleys
  • Knives, Rotary, Slitters
  • Shafts, Journals, etc.

Ceramic Coatings Advantages

  • Severe corrosion protection
  • Extreme wear resistance
  • Erosion/abrasion resistance
  • Built-in lubricity
  • Low friction, non-snagging satin finish
  • Thermal barrier
  • Anti-galling
  • Seal-friendly surfaces
  • Electrical resistivity or conductivity

Typical Variations of Ceramic Coatings


PL-130 (Alumina-Titania)

This Plasma sprayed coating is extremely popular in the textile and fiber industry.  Such coatings are very hard with a fine matte finish ideal for fiber contact.

PL-106 (Chrome-Oxide)

Popular for its superior corrosion and extra wear resistance.  Its virtual hardness exceeds 74 Rc making it one of the hardest ceramic materials.  It is widely used for seal applications on shafts, sleeves and such.

PL-201 (Zirconium-Oxide)

Applied by our high energy plsam spray processes.  It is known for its thermal resistance at temperatures approaching 3000 F.

PL-210 (Magnesium-Zirconate)

Excellent choice for applications that require resistance to thermal shock with cyclical patterns.  It is ideal to be used as coating for ingot molds and molten metal handling equipment.

PL-102 (Titanium-Oxide)

This coating is considered to be extremely tough, inert with excellent resistance to hard surfaces.  It is applied on shaft and high speed spindle surfaces.  It works well on applications subjected to mechanical shock and impact.

MBI Coatings Ceramic Coating PDF Download

MBI Ceramic Coatings (pdf)


Sign up today to hear from us about coating industry, technology and performance news and updates!

Contact Us

Engineered Industrial Coatings

Surface Engineering & Coating Technology

Full Service Machine Shop

Serving Industries in the United States

MBI Coatings, Inc.

2088 Industrial Park Road, Lancaster, South Carolina 29720, United States

(803) 313-9292


Message Us


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.